BAE Department - University of Kentucky
 
The values which are already filled are default values. You can change the values in yellow cells if you have more up-to-date information.
Use the length calculator to get estimates of fence length. Enter values in the length calculator if pasture lay-out is reasonably regular. If the fence line is irregular because of boundaries, topography, etc., then enter the value directly under General Inputs.
 
General Inputs
   
No. of acres
 
Length of fence
miles
 
rods
 
feet
No. of Corner assemblies
 
No. of End assemblies
 
Woven wire (1=Y, 0=N)

 
     
No. of Runs of barbed wire
 
Post Spacing
feet
No. of spacers between posts
 
Tractor driven posts (1=Y, 0=N)
 
Labor cost
$/hr
Length calculator
   
No. of acres
acres
Ratio of length to width
 
No. of square feet
sq. ft
Square dimension length
ft
Side dimension
ft
End dimension
ft
Total fence length    
ft
miles
Total fence length for square paddock
ft

   
Material
 Costs
   
Item
Number
 
Unit
Cost/unit
Total cost
Posts          
   Line
 
e.a
$
   Brace
 
e.a
$
   Corner
  e.a
$
Spacers
  e.a
$
Woven Wire
ft roll
$
Barbed Wire
ft roll
$
Staples          
   No./post
       
   Total
  e.a
$
SUB-TOTAL        

 

        Labor Costs      
Item
Number
 Unit
Time/Unit
  Cost/unit
Total hrs
Total cost
Line posts
post
min
$
Corner or end assemblies
ea.
hr
$
Spacers  
min
$
Woven wire              
   unwind and stretch
ft
min
$
   fasten
posts
min/post
$
Barbed Wire              
   unwind and stretch
ft
min
$
   fasten
post
min/post/wire
$
               
Tractor cost         cost/hr    
   post driver
post
min
$
SUB-TOTAL          

 

    TOTAL COST    
 
Total cost
Cost/mile
Cost/ft
Cost/ac
Materials $ $ $ $
Labor $ $ $ $
Total $ $ $ $

 

Adapted By Original Web Version

Updated 04/12/2013

Please direct questions and comments regarding this website to

This page is part of the Biosystems and Agricultural Engineering web at http://www.bae.uky.edu